WHAT DOES THE PANEL WEIGH?

The Zephyr 3200 is just over 40 lbs and the Cyclone is approximatly 20 lbs.

CAN MORE THAN ONE PANEL BE USED AT A JOB SITE?

Yes, depending on the job-site size and needs, you can customize your solution using multiple panels. You may find it beneficial to use the Zephyr on the first floor of a project, for instance, and a Cyclone on the second floor. In the “Outside the Box” section there are solutions that show the panels on various job sites.

WHAT IF i only have one exterior door AT MY WORKSITE?

In that case, you may want to select the Cyclone 2824, our product designed for windows. Be sure to check out our “Outside the Box” page to see the Zephyr and Cyclones Flexibility of Use.

WHAT SIZES DO THE PANELS COME IN?

Our door panels come in sizes of 32” x 80” and 36” x 80”. Our single fan window panel is 28” x 24”. In addition, our baffle systems can increase the panels’ height by up to 16 inches for the Zephyr models and 10 inches for the Cyclone.

WHY DO YOU OFFER VARIOUS SIZES OF PANELS?

Depending on your point of access, our models are designed to best fit the needs of our customers. You may have to use the Zephyr 3600 in a front door or the Zephyr 3200 in a side or back door. We have Window and Door models. If you check out our “Outside the Box” page, you can see the various models in action.

What if i’m concerned about the dust and fumes being expelled outside?

All of the models are capable of being filtered.

What if i’m working in an interior room?

No worries. Use the Cyclone with the flex tube system.

If you are pulling dust and fumes out of the house, aren’t you pulling out the Heat or Air conditioning?

The short answer is, YES.

So why do you use it ?

Customers report by minimizing the amount of cross ventilation (partialy opening a window) they can control the heat or air loss. And they say the benefits of leaving the job cleaner than you found it far outweigh a little heat or air loss.